2021

Learn more about what is, how to work and how to choose the best vertical and horizontal autoclave (stream sterilizer) according to your need? Follow in this post to find out!

ABOUT HORIZONTAL & VERTICAL AUTOCLAVE:

Autoclaves have a useful lifespan, just like other machinery. And to ensure effective sterilization and user safety, it’s important that all components are fully operational. Autoclave The most complete sterilization solution on the market, which can be configured according to the client’s needs, making the equipment flexible to meet different segments, from hospitals, dental clinics, sterilization centers, laboratories, industries and more.

Horizontal Autoclave:

• Round horizontal autoclave volume size (capacity): up to 550 liters
• Rectangular horizontal autoclave volume size (capacity): up to 1200 liters
• Working temperature up to 134°C
• Working pressure: 15 – 20 psi
• Sensor: Calibrated PT 100
• USB port for recording cycles
• Stainless steel 304 Piping
• Insulation: High-Quality Glass wool

Vertical Autoclave:

• Fully automatic top loading steam sterilizer
• Volume size (capacity): up to 250 liters
• Working temperature up to 134°C
• Working pressure: 15 – 20 psi
• Real-time printer (optional)
• USB port for recording cycles
• Stainless steel cover
• Overpressure safety valve
• Analog operation via selector switch
• Control valve with weighing system and adjustable counterweight

HOW TO USE THE AUTOCLAVE CORRECTLY?

• The duration of the process is, on average, 40 minutes (check the exact time with the manufacturer). This takes into account the entire heating time and exposure of materials to high temperatures. The temperature even varies from up to 134ºC, according to the model.
• This cleaning facilitates air circulation and drainage, in addition to promoting the penetration of steam into the equipment.
• All of this is done without the need for human handling, as the autoclave itself performs the entire procedure.
• The only job is to pack the equipment and load it into the machine.

STEP-BY-STEP AUTOCLAVE STERILIZATION PROCESS:

• First it is necessary to put a certain amount of water in the autoclave chamber. Each machine model has a different indication and it is necessary to follow it;
• For materials in a more critical state of cleaning, it is ideal to leave them for about 30 minutes in a disinfectant solution before sterilization;
• The process on how to pack dental supplies for sterilization is as follows: pack your working supplies (scissors, tweezers, high rotation, counter angle, etc.) in surgical grade paper — available in envelopes or rolls;
• Then, you should just place equipment of the same material in each sterilizer tray. If there is an object of different material, set it aside in another tray;
• Avoid overloading your autoclave and place only small objects at a time;
• For each package or tray, use a chemical indicator;
• Place the equipment properly packaged, always remembering to keep plastic in contact with plastic and lighter ones over heavier ones. This helps in air drainage and steam circulation;
• To prevent accumulation of water on concave objects, always place them face down;
• Turn on and wait for the heating and sterilization cycles to complete;
• Hang up and wait. Once the envelopes are cool, store all of them in a locker until ready to use. For this purpose, Formica cabinets or furniture that do not come into contact with moisture or heat are indicated.

These are some basic and essential precautions for before and after sterilization in the Horizontal & Vertical Autoclave, but they make all the difference in the process of sanitizing your work instruments.

CHECK BEFORE BUY A HORIZONTAL & VERTICAL AUTOCLAVE:

• You can always count on autoclave equipment suitable for your process, in perfect working order and with up-to-date technology.
• The focus of this modality is the acquisition of a good, not a solution.
• You have full control of your equipment’s condition and updates, including maintenance.
• However, all upgrade, maintenance, replacement parts and installation costs are the responsibility of the equipment owner.
• There is a need for an initial investment to purchase the autoclave machine.
• And if you need a replacement of equipment, due to breakdown or other need, you need to acquire a new one – which can lead to a loss of capital.

Therefore, it is important to think carefully before making this decision. But if you have any doubts, don’t worry: get in touch with Yatherm Scientific expert team, who are prepared to clarify any questions and offer the best option for you. Visit yatherm.com and choose the best Horizontal Autoclave or Vertical Autoclave for your complete and effective sterilization solution!

Read more about Biosafety Cabinet and Muffle Furnace by Yatherm scientific manufacturer of scientific equipment.

WHAT IS FLAME PHOTOMETER?

Analysis by flame photometry is a very simple technique based on atomic spectroscopy. The sample is sucked into a flame, receives its energy and generates excited species, which return to the ground state and release part of the received energy in the form of radiation, at specific wavelengths for each chemical element. The estimation of the concentration of compounds by flame photometry is a very important application in different types of samples.

Flame Photometer provides a reliable, fast, and convenient procedure for routine alkaline and alkaline earth metal determinations. The technique provides a fast and reliable means to analyze sodium, potassium, calcium, lithium and barium in a variety of materials.

The flame photometer has application in quantitative analysis in the areas of pharmaceutical, clinical biochemistry and in the fertilizer industry, allowing the determination with simultaneous direct indication of sodium and potassium, whether in the industrial area or in the clinic. The Flame Photometer displays data on a liquid crystal display, in graph form, in terms of concentration. The Flame Photometer operates with automatic calibration of zero and concentration and with a parameter selectable by software. It is combination of clinical, industrial and educational applications in a single instrument and provides fast, accurate analysis in a single aspiration.

FEATURES OF FLAME PHOTOMETER:

• For Measurements and Detections of: K Potassium, Na Sodium, Li Lithium, Ca Calcium, Ba Barium
• Up to 5 Elements in a Single Aspiration (Na, K, Li, Ca and Ba)
• Randomly and Simultaneously
• Communication with Computer or Printer
• Display Touch Screen for Data Entry
• Simultaneous Readings of All Elements
• Direct Readings in ppm, %, mg/L, mEq/L, mmol/L and Others upon Request
• Automatic Calibration
• Chamber and Detachable Burner
• Linearization of the Work Curve
• Automatic Gas Box with Interlock
• Automatic Flame Shutdown in the Absence of Oxidizer
• Coalescent Filter with Automatic Purge Automatic
• Flame Ignition
• Nebulizer and Burner in Stainless Steel
• Barium Reading Can Be Included Increasing the Cost
• Output for PC, Printer and USB
• Recording and Downloading Of Readings

USES OF FLAME PHOTOMETER:

Used to analyze the dosage of specific elements contained in samples: Sodium (Na) and Potassium (K), which may include Calcium (Ca) and Lithium (Li) (optional filters). This observation takes place through the colors that each chemical element is capable of emitting when in contact with a non-luminous flame. Flame Photometer allows stable and reproducible readings for use in clinical analysis and laboratories in the food, ceramic, fertilizer, cement, beverage, etc. industries.

WHERE TO BUY & LEARN MORE ABOUT FLAME PHOTOMETER:

If you are looking for right Flame Photometer, you can find it on the Yatherm Scientific website “yatherm.com“, contact to experts to learn more about Flame Photometer and make your free quote with professionals that best meets your needs. Yatherm Scientific is a leading and trusted company in India that provide and operates in the segment of equipment for quality control, research and development and world-class scientific instruments in the laboratory, university, pharmaceutical, veterinary and cosmetic industries.

Read more about Dissolution Test Apparatus and Biosafety cabinet by Yatherm scientific manufacturer of scientific equipment.

For any enquiry related to any laboratory instruments, feel free to contact us:

Call:  +91 72920 55144

Mail: info@yatherm.com

Handling and sorting granular materials that may be of small, medium of large size is a very common task in many research laboratories or industries. In many mining industries, these sieves are regularly used to separate ore from sand, dirt, dust and mud etc. These sieves are important for separation of mined minerals which should be then sent for further processing.

Yatherm is a premier industrial and lab equipment manufacturer and we have extensive experience in designing and manufacturing different kinds of lab and industrial use machinery. We manufacture vibrating screens and sieves to fit various industry standard as well as custom required sizes. We also make sieves that can be used in small size lab based sieve shakers to large size screens that are used for industrial and mining purposes. Our vibrating screens are equally usable in both electromagnetic and motorised shakers.

Vibrating sieve size options availablefrom Yatherm include:

• 50 cm by 200 cm
• 50 cm by 250 cm
• 50 cm by 300 cm
• 100 cm by 200 cm
• 100 cm by 250 cm
• 100 cm by 300 cm

Vibrating screens are fitted in machines with a multi-layered structure.

• Screen box is the primary holder where the material that has to be shaken and cleaned is put in for the screening process.
• Screen frame is the second set of components which is meant to hold multiple layers of sieves together.
• Vibrating Sieve is the actual sieve that is used to separate the valuable material from the dust, dirt and sand. These can be made of many things including most common ones like stainless steel wire mesh, or low carbon steel to more uncommon ones like brass and bronze.
• Vibration motor is the machine that actually moves the sieve vibrate and move around and thus functions properly.
• Motor pedestal is used to mount the vibration motor in a sturdy and stable position. If a machine is newly assembled, it must be duly examined, and its nuts and bolts must be properly tightened.
• Damping springs are used to ensure that only minimal amount of vibration is directed towards the ground and the entire machine remains stable and fixed and vibrations do not cause it to judder and move around,
• Stents are used to hold the entire vibrating screen machine assembly together, upright or at an angle. Consider them the pillars that act as the load bearing entities for the entire device.

Common features of vibrating sieve machines

• These machines are available in small sizes but with large volume of material to be screened
• Yatherm machines are lightweight, and easy to install, dismantle and move around.
• Our machines are fitted with energy efficient motors which save electricity costs.
• Yatherm vibrating sieves are made using simple and plain but durable designs.
• Our products are easy to clean, maintain are replace when worn.
• We make screen meshes using wear resistant bars to ensure long life of products.

For the best quality and most affordable industrial and lab equipment always rely on Yatherm as your partner of choice.

Read more about Test Sieves  and Vacuum Drying Oven by Yatherm scientific manufacturer of scientific equipment.

ABOUT BOD INCUBATOR:

The BOD Incubator or also known as BOD Chamber allows the creation of an environment with controlled temperature. Due to its reliability and flexibility, it is used today in the most diverse applications: plant growth, germination, incubation. Oxygen) and other laboratory applications where a low and medium temperature environment is required. BOD incubator developed for laboratories or demands that need exact temperature control for incubation work, determination of the level of pollution, efficiency of treatment systems, insect biology studies and other applications.

BOD INCUBATORS WITH REFRIGERATION AND HUMIDITY CONTROL:

BOD Incubator (Biochemical Oxygen Demand Incubator) is a very versatile laboratory equipment due to the temperature range it can reach. The BOD Incubator with Humidity Control adds a microprocessor controller with relative humidity regulation from 20% to 90% and works with humidity in the range of -10°C to 60°C with temperature control accuracy of +/-0.2°C.

BOD INCUBATOR FEATURES:

• The Bod Incubator is widely used in food industries, water and sewage companies, microbiology laboratories, genetics and elsewhere.
• Great internal use in relation to the occupied area inside the laboratory.
• The Bod Incubator has a temperature controller system, called a PID microprocessor. It also has a digital indicator accurate to + / -0.2°C.
• Externally cabinet in GI Powder coating. Internally chamber in Stainless Steel.
• The Bod Incubator is resistant to heating and shielded in stainless steel tubing at a power of 200 Watts. The cooling carried out by the Bod Incubator occurs with a sealed humidity, a power of 1/8HP and thermal insulation in expanded polyurethane.
• The photoperiod time of the Bod Incubator is user-adjusted and the working range varies from -5°C to 60°C, while the capacity is variable.
• Thermal insulation with low temperature dissipation and door built with magnetic seal with high sealing power.
• Flexibility in sizes from 95 to 1000 liters.
• Environmentally friendly, CFC-free refrigeration system.
• Easy to use and Easy to clean.

WHERE THE BOD ANALYSIS PROCESS IS NEEDED?

The control of BOD levels, considered a dynamic variable, is essential for a correct analysis and conduct in the treatment process. Some examples where this type of analysis is frequently performed: industries in general, sewage treatment plants, research institutes, among others. The BOD test can be considered a bioassay procedure that involves the measurement of oxygen consumed by microorganisms (mainly bacteria) in the conversion of organic matter present to carbon and water, under similar conditions that occur in nature. To qualify the test, samples must be protected from air to prevent reaction as the dissolved oxygen level decreases. Also, because of the limited solubility of oxygen in water, concentrated sewage can be diluted to demand levels that do not deplete all the dissolved oxygen in the sample.

WHERE TO BUY BOD INCUBATOR?

Yatherm Scientific represent the best firm in India, with a wide range of laboratory equipment with quality and innovative technologies for numerous needs and that can complement each other in integrated solutions. Yatherm Scientific brands are recognized and have served research institutions, analytical laboratories as well as manufacturing companies in quality control and process applications with increasingly sophisticated and reliable products that provide the solution for their individual tasks. If you need help choosing the right BOD Incubator that best meets your needs, visit at yatherm.com and contact to expert team of Yatherm Scientific.

Read more about Air Shower and Hot Air Oven by Yatherm scientific manufacturer of scientific equipment.

Many kinds of scientific equipment are used in different scientific labs these days. With the evolution of technology, biological and biochemical labs have started to expand their horizons. They are undertaking many new kinds of scientific and biological experiments these days. Many of these experiments have been made possible by the development of CO2 Incubators. Common experiments and lab procedures you can undertake using these incubators include:

1. These devices can be used for undertaking stem cell culture development and its applications in medical science.
2. Incubators can be employed in cell culture work including pathological and medical tests as well as to find presence and absence of any bacteria.
3. CO2 incubators can be used in genetics labs where experts are involved in genomic and proteomic expression and study of different proteins and their impact and interaction with botanical or zoological organisms.
4. Labs which are involved in long duration research work can use these incubators for storage of gametes
5. IVF and reproductive labs can use Yatherm CO2 incubators for storage of embryos in a controlled environment.
6. Labs which are involved in botanical, marine and plant based studies use this machine for amphibian cell cultures and controlled growing of exotc plants.
7. Many modern biotechnology labs are using these machines for the cultivation of transgenic and hypersensitive cells.
8. There are a number of medical research and education institutions which are using these machines for tissue culture activities including practical application in regeneration of autologous tissue.

There are a number of features in these CO2 incubator machines which make them highly suitable for above mentioned applications. Most common of these include:

Home

1. These machines are equipped with dual wave infrared sensors which act as a great mode of monitoring and control of temperature, even in dark or extremely low light environments.
2. In order to control the risk of any contamination and germs being spread or causing any culture contamination, the machines are made of stainless steel with the interior of machines being made using an alloy of copper and stainless steel.
3. Excellent grade sensors are fixed in the machine to ensure that control of carbon dioxide, humidity and temperature levels. These sensors are very precise and sensitive and can be used for very advanced studies and experiments.
4. These incubators are used for dual sterilization cycles, At first the humidified sterilization takes place at 95 degrees centigrade and then dry sterilization takes place at 145 degrees centigrade. These machines are also able to perform single stage sterilization.
5. The incubators are equipped with CO2 sensors and control valves which ensure that operators can control CO2 levels with minimal user input and to very precise pressure and concentration levels.
6. These machines are equipped with HEPA filters to prevent the samples from any risk of contamination from any airborne particles or pollutants.
7. The incubator is designed in such a manner that internal airflow within the machine is very smooth and does not disturb the cell culture being incubated in it.

These CO2 incubators are designed to be as user friendly as possible.

For any enquiry related to any laboratory instruments, feel free to contact us:

Call:  +91 72920 55144

Mail: info@yatherm.com